|
|
Post by faffer on Nov 15, 2016 17:46:45 GMT
I did have the workings out to weight a boat using the bathroom scale methid, it was on the CWF but i cant find it, and saved it on the laptop but i think have delted it after a clean up the other week. I believe it is accurate to around 60kg.
Anyone have it please.
i amsearching the net but no lucj yet, i tried the water disp but i ended up with near 3 ton lol.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 15, 2016 18:11:55 GMT
|
|
|
|
Post by faffer on Nov 15, 2016 18:41:18 GMT
Thats the one at the top kida, just it will not be on a trailer but should work the same with the frame it is sat on and moving that instead of the boat.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 15, 2016 18:46:02 GMT
No problem mate  |
|
|
|
Post by faffer on Nov 15, 2016 19:47:38 GMT
As the boat is not on a trailer and in the set out it says to put the scales under the trailer tongue, i am thinking on setting the boat to balance 60kg on the bow point, to act as the nose/tongue load. Then do as instructions as the beam acts as the axle on the trailer.
that sound ok.
I just need to move the beam and supports it is sat on forward 6 inch as then it lifts the bow with 12 stone on the transom...being me when i climb aboard.
|
|
