|
Post by JohnV on May 7, 2017 11:17:02 GMT
Is there an air vent or opening at the other end of the boat? If not I would suggest making one and using something like a computer fan to give through ventilation. Even quite a small airflow will help the drying process and greatly reduce the time needed Not keen on computer fans though I agree one would speed things up, so maybe. computer fans have two things going for them ..... you can pick them up for next to nothing and they use very little electrickery.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 7, 2017 11:57:16 GMT
They are handy but in my limited experience they become noisy as the sleeve bearings wear out. If you do fit them then its handy to be able to quickly swap out for a new one.
|
|
|
Post by lollygagger on May 7, 2017 12:51:47 GMT
They are handy but in my limited experience they become noisy as the sleeve bearings wear out. If you do fit them then its handy to be able to quickly swap out for a new one. I'd be happier to get some natural air flow going on even if it does take longer to dry out. Fit and forget style.
|
|