Buffalo/Phenolic board.

ianali Super Member Posts: 5,354	Buffalo/Phenolic board. Jan 23, 2024 12:22:06 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by ianali on Jan 23, 2024 12:22:06 GMT Anyone have experience of treating freshly cut edges for sealing them?

dogless Long Standing Member Posts: 2,843 Member is Online	Buffalo/Phenolic board. Jan 23, 2024 12:54:03 GMT ianali likes this Quote Select Post Deselect Post Link to Post Back to Top Post by dogless on Jan 23, 2024 12:54:03 GMT Rightly or wrongly when we replaced the catch board removable wings, we used a clear marine varnish. That was in 2016 and all's well still. Rog
	Dunk and cds on ignore ... sorry if posts consequently seem out of sync 😁

brummieboy
Long Standing Member

Posts: 1,125

Buffalo/Phenolic board. Jan 23, 2024 14:42:44 GMT ianali and Jim like this

Quote

Post by brummieboy on Jan 23, 2024 14:42:44 GMT

I used an epoxy resin recommended by the manufacturer/distrubitor, which apperantly complements the make up of the board which is epoxy resin bonded. Can't remember the name of the specific one but I do have some left, and at the end of each season, I renew the seal.

Last Edit: Jan 23, 2024 14:43:35 GMT by brummieboy

Buffalo/Phenolic board.

Post by ianali on Jan 23, 2024 12:22:06 GMT

Post by dogless on Jan 23, 2024 12:54:03 GMT

Post by brummieboy on Jan 23, 2024 14:42:44 GMT

Shoutbox