|
Post by mouse on Mar 30, 2019 16:52:19 GMT
The cider in the “Swan on the River was drinkable even if it was Aspalls!
|
|
|
Post by phil70 on Mar 30, 2019 17:06:05 GMT
Don't watch this if you suffer from epilepsy! That vid was from years ago, marina looks nowt like that now. We live at the end of a100m drive up the side of the white cottage at 5.36. Phil
|
|
|
Post by JohnV on Mar 30, 2019 18:28:34 GMT
The cider in the “Swan on the River was drinkable even if it was Aspalls! when I went in there ..... thought it an odd place, a small pub struggling to be an up market bistro but it not quite coming off. good spot to stop at though and nice and close to Littleport Boat Haven
|
|
|
Post by naughtyfox on Mar 30, 2019 18:43:49 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2019 20:41:29 GMT
Oh mouse a Common Ocean 30 - and to think Colin Chapman hoped to make a fortune on the Aquafibre 30 hull mould Definitely look better as a Convertible Sedan as the yanks would call them - Hardtop may give you a more user friendly cockpit but it wouldn't fair very well on the the Middle Levels ot above Alwalton lock for that matter 🔨🔨🔨🔨🙈
|
|
|
Post by naughtyfox on Mar 30, 2019 21:00:35 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2019 21:10:51 GMT
Exhaust lagging is a bit of a nuisance if the equipment is mild steel. It traps moisture which is going to cause corrosion issues. I explained this to my BS man and he said its ok it does not need to be lagged anyway. That was just before I gave him a monkey for the upload of my data to the BS server.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2019 21:14:30 GMT
I'm guessing the silencer will be some type of automotive part. I think its a Burgess BSP threaded silencer.
|
|
|
Post by naughtyfox on Mar 30, 2019 21:16:13 GMT
Some nice pics here:
|
|
|
Post by naughtyfox on Mar 30, 2019 21:17:57 GMT
That was just before I gave him a monkey
|
|
|
Post by Jim on Apr 2, 2019 14:44:18 GMT
Back OT, there are places that make exhausts, there is one in Rochdale called Greenwoods, there must be others around the country. You'd just need to supply them with dimensions.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2019 14:51:21 GMT
Is it not an off the shelf BSP threaded silencer.
I guess if he wanted a hospital silencer it could be a custom job.
|
|
|
Post by naughtyfox on Apr 2, 2019 16:16:17 GMT
I have no idea what it is. I have made a note to remove the lagging / heat wrapping this Summer, if I have time and if it looks not-too-difficult. I am a nosey so-and-so and want to see just what we've got. It could be an Egyptian inside.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2019 16:32:52 GMT
If you mess with ancient burial sites you will live to regret it. Yes the gold might be nice but the karma will get you.
|
|