|
Post by faffer on Sept 29, 2017 17:47:16 GMT
|
|
|
Post by Graham on Sept 29, 2017 19:01:39 GMT
Could do for my new ketch, about the right size. But price is out of this world. Doubt it is 6 tonnes though
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 29, 2017 19:58:52 GMT
You wouldn't want to drop it on your toe!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 29, 2017 20:39:32 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps?
|
|
|
Post by thebfg on Sept 29, 2017 20:53:37 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps? I'm no expert but is that for a crossbar on an admiralty anchor.
|
|
|
Post by Graham on Sept 29, 2017 21:06:03 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps? I'm no expert but is that for a crossbar on an admiralty anchor. I doubt it on a single fluke anchor, a crossbar could turn it upside down so that it would not bite.
|
|
|
Post by Stumpy on Sept 29, 2017 23:36:29 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps? A very good question young Martin. I thought it could have been a rigging hole for a weak link. However, I've emailed a copy of the photo to a mate in the RN, so i'll let him do the research.
|
|
|
Post by Jim on Sept 30, 2017 6:01:21 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps? I suspect Grahamn and Stumpy are looking at the wrong hole. Go to specsavers and look again, there's a small hole near the tip of the blade, not the extra hole near the shackle.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2017 8:08:00 GMT
Now here's a question somebody may know the answer to, what's the hole near the tip for? A hangover from the manufacturing process perhaps? I suspect Grahamn and Stumpy are looking at the wrong hole. Go to specsavers and look again, there's a small hole near the tip of the blade, not the extra hole near the shackle. That is indeed the hole I'm referring to. It may have no purpose at all but it would be strange to manufacture it with it there if there wasn't a reason for it.
|
|
|
Post by JohnV on Sept 30, 2017 8:23:00 GMT
There is also what looks like a fitting (shackle?) on the back of the shank in the normal position for a tripping line. It might be that the small hole in the point of the fluke is for shackling down for stowage, or as it is obviously a specialist design, it could be to do with how it is positioned. ...... If it is for a rig or some such thing it might be set with the aid of divers or ROV's
|
|
|
Post by faffer on Sept 30, 2017 8:54:29 GMT
All i can think is the what boat it should be hanging from, well which ship.
A guess that the hole in the spade maybe for a line to lift it ?
|
|
|
Post by cuthound on Sept 30, 2017 11:21:01 GMT
You wouldn't want to drop it on your toe! You would have to pick it up first
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2017 13:20:28 GMT
Hello
Been lurking a while and as I know a bit about anchors I thought I would join in here.
This is not a ship anchor. Its a mooring anchor which would be permanently laid into a riverbed. The small hole at the end is for lifting it with a crane.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2017 14:11:25 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2017 17:51:17 GMT
No thats what brothels were for.
|
|