|
Post by Clinton Cool on Aug 10, 2016 18:02:58 GMT
I know how to do a small one, use a plate or similar with a blade and masking tape. Any tips on how to paint a longer curved line? It's around 2 foot 6 long.
Cheers
|
|
|
Post by Mr Stabby on Aug 10, 2016 18:14:50 GMT
I repainted my coachlines last year and I used a home-made maulstick (well, ok, a few bits of wood banged together with a couple of nails) and that seemed to work ok.
|
|
|
Post by Graham on Aug 10, 2016 20:07:44 GMT
I know how to do a small one, use a plate or similar with a blade and masking tape. Any tips on how to paint a longer curved line? It's around 2 foot 6 long. Cheers Do you mean a curve with a diameter of 2'-6" or the line is 2'-6" long from beginning to end?
|
|
|
Post by Clinton Cool on Aug 10, 2016 21:13:35 GMT
2 foot 6 from beginning to end. It's a coach line at the front of the boat, the curve to match the curved steel of the hull.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 10, 2016 22:48:06 GMT
I know how to do a small one, use a plate or similar with a blade and masking tape. Any tips on how to paint a longer curved line? It's around 2 foot 6 long. Cheers Not sure what they are called but there are flexible drawing aids which bend into curves for this purpose. I think I used them years ago for drawing mean/average curves on graph paper.
|
|
|
Post by kris on Aug 11, 2016 3:21:20 GMT
I know how to do a small one, use a plate or similar with a blade and masking tape. Any tips on how to paint a longer curved line? It's around 2 foot 6 long. Cheers Not sure what they are called but there are flexible drawing aids which bend into curves for this purpose. I think I used them years ago for drawing mean/average curves on graph paper. French curves I think they are called, I'd be tempted to make a template out of thin card, then you've got a good chance of getting it the same both sides.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 11, 2016 8:43:13 GMT
Not sure what they are called but there are flexible drawing aids which bend into curves for this purpose. I think I used them years ago for drawing mean/average curves on graph paper. French curves I think they are called, I'd be tempted to make a template out of thin card, then you've got a good chance of getting it the same both sides. That's quite a good idea as you can also keep the template in case you need to redo it in the future.
|
|
|
Post by Stumpy on Aug 11, 2016 9:13:05 GMT
Kris is quite right They are called French Curves........... Clickor you could use a Flexi Curve like this........... Click
|
|
|
Post by twbm2 on Aug 16, 2016 12:34:49 GMT
Use the curve of the hull as the basis for scribing the curve with chalk or pen, using a suitably sized block of wood as the 'spacer'.
|
|
|
Post by Clinton Cool on Aug 21, 2016 10:11:55 GMT
Back on this now. I'm fortunate in that I already have the curved stripe (badly done) but want to go over it in my new colour, and tidy it up. I tried messing around with pvc tape, managed to follow the curve quite easily. The thing is, is the new paint likely to bleed under pvc tape?
|
|