|
Post by quaysider on Sept 11, 2016 9:31:45 GMT
|
|
|
Post by Graham on Sept 11, 2016 10:50:10 GMT
Next time tie it to a round fishing weight and the weight will carry it down the ducting held vertically.
|
|
|
Post by naughtyfox on Sept 11, 2016 10:57:13 GMT
I'm glad we bought a 'ready made' boat! So we can blame all the faults on the previous owners!
|
|
|
Post by quaysider on Sept 11, 2016 14:17:45 GMT
Next time tie it to a round fishing weight and the weight will carry it down the ducting held vertically. after much fecking about trial and error, we pulled it the full length through the lounge into the back bedroom (hark at me, all Coronation Street) and fed some "truck airline" through it before pulling the para cord back... PREVIOUS attempts had included tying a knot in the cord and using the compressed airline at work to try and "blow it through".... which didn't work.
|
|
|
Post by PaulG2 on Sept 11, 2016 14:29:18 GMT
Next time tie it to a round fishing weight and the weight will carry it down the ducting held vertically. after much fecking about trial and error, we pulled it the full length through the lounge into the back bedroom (hark at me, all Coronation Street) and fed some "truck airline" through it before pulling the para cord back... PREVIOUS attempts had included tying a knot in the cord and using the compressed airline at work to try and "blow it through".... which didn't work. Light string tied to an appropriate sized cotton ball and then suck it through with a vacuum cleaner. Just in case you ever have to do it again.
|
|
|
Post by Graham on Sept 11, 2016 14:37:54 GMT
after much fecking about trial and error, we pulled it the full length through the lounge into the back bedroom (hark at me, all Coronation Street) and fed some "truck airline" through it before pulling the para cord back... PREVIOUS attempts had included tying a knot in the cord and using the compressed airline at work to try and "blow it through".... which didn't work. Light string tied to an appropriate sized cotton ball and then suck it through with a vacuum cleaner. Just in case you ever have to do it again. Thats a good idea
|
|
|
Post by PaulG2 on Sept 11, 2016 15:36:53 GMT
Light string tied to an appropriate sized cotton ball and then suck it through with a vacuum cleaner. Just in case you ever have to do it again. Thats a good idea A tried and true technique, sir. Ask any Sparky, they'll tell you.
|
|
|
Post by quaysider on Sept 11, 2016 15:57:12 GMT
Thats a good idea A tried and true technique, sir. Ask any Sparky, they'll tell you. irritatingly, my brother is a sparky and his best offer was "tie some string to some cooker cable and shove that through our kid"....
|
|
|
Post by JohnV on Sept 13, 2016 8:01:48 GMT
my normal reply is "use a mouse" ........ that's an electricians mouse, If it's one of the better ones with a proper little wheel on the end it can be pushed a hell of a long way down flexi conduit especially if you can stretch it out so it is in a reasonably straight line. The cheaper type with the rounded tip have a tendency to snag up on the corrugations.
|
|